Standards for solar water heaters and a number of energy-related appliances are coming to the Caribbean.
And key to this development will be policymakers, standards and energy experts who will meet in Barbados from May 17th to 19th, 2017, for a major workshop on energy standards and policy analysis, at the Divi Southwinds Resort, St. Lawrence Main Road, Christ Church.
The experts and policymakers will be exposed to a Policy Analysis Modelling System (PAMS), designed by the Collaborative Labelling and Appliance Standards Program (CLASP) and the Lawrence Berkeley National Laboratory (LBNL) which was developed “to help local policymakers assess the benefit of standards and labelling programmes”.
The one-day policy analysis workshop, which falls on the first day of the three-day training, discussion and planning forum on energy efficiency standards and labelling standards, is being held as part of CARICOM Regional Organisation for Standards and Quality (CROSQ)-implemented Renewable Energy and Energy Efficiency (R3E) Project.
The R3E Project focuses on developing standards for the energy sector in the region, namely energy efficiency and renewable energy standards, with supporting infrastructure for energy efficiency testing of appliances – namely, room air-conditioners, refrigerators and freezers, and lights – along with the development of standards for solar PVC panels and solar water heaters in the region. It is funded by a 1 Million Euro investment from the German Government, and is partnered by the German National Metrology Institute (PTB) and the Dominican Republic’s National Standards Body, INDOCAL.
CROSQ’s Technical Officer - Standards, Mr. Fulgence St. Prix explained that at the PAMS workshop, CLASP officials would explain how to estimate potential savings from implementing energy efficiency policies in the region.
“We talk a lot in the Caribbean about energy efficiency and introduction of renewable energies, but there isn’t that understanding at the national levels sometimes about how this actually benefits the countries in terms of dollars and cents. This is what this workshop is aimed at helping policymakers more effectively do.
“We are in the process of developing Energy Efficiency Building Codes for the region and this factor of savings will be a crucial one to getting Member States in the Caribbean to understand how it benefits their economies at the end of the day. So that’s what we aim to do through this workshop, and using actual case studies to further solidify our position,” said St. Prix.
He noted that this was but one day of what would be happening this week when energy, policy and standards experts from across the Region and Germany, gathered in Barbados.
“On the second day of the workshop, energy experts will sit together and plan a Road Map to determine the steps to the development and implementation of a labelling scheme for refrigerators, lighting and room air conditioners. And the following day we will sit as a group to determine which standard will be used from the several examples we’ve been studying over recent months, and plan our next steps in the development of the standards for labelling of energy efficient appliances,” he further explained.
Deciding on the approach and right standards to use as the basis for the regional approach which will then be adopted by CARICOM Member States, is a crucial part of the process for the development of the energy efficiency and renewable energy standards.
About The R3E Project
The Renewable Energy and Energy Efficiency (R3E) Project is primarily based on the premise that the introduction of standards, testing and other quality-related services into the RE and EE subsectors, could result in significant changes to the way energy is viewed and the focus paid by policymakers, retailers, general public and other vital stakeholders in these areas.
Its main components are the development of standards for RE appliances – namely solar water heaters; development of standards for photovoltaic systems; regional energy performance standards for EE appliances – namely refrigerators, air conditioners and lighting; as well as an efficiency labelling scheme for the stated appliances. It also aims to establish centres for testing of these appliances in the region, and other supporting quality systems.
The aims of this project are:
· Support of regional standardisation activities for this sector, and use of these activities for the creation of binding directives and technical regulations.
· Establishment of technical expertise for testing and measurement services in individual countries.
· Awareness-raising, informational and public relations activities, as well as dialogue with persons in decision-making and other key positions.
IIt is funded to the tune of 1 million Euros from the German Government; managed by the German Metrology Institute (PTB) and implemented by the CARICOM Regional Organisaiton for Standards and Quality (CROSQ) and the Dominican Institute for Quality (INDOCAL) in the Dominican Republic.
The Caribbean Agricultural Health and Food Safety Agency (CAHFSA) has been monitoring the issue relating to the sale of unwholesome meat and meat products originating from Brazil.
Several Member States have already instituted measures to restrict the importation of some or all meat products from Brazil. It is noted that China, the European Union, and Chile have also instituted restrictive measures.
The United States Department of Agriculture (USDA) has redoubled its food inspection efforts on beef products from Brazil although none of the slaughtering or processing facilities implicated in the Brazilian scandal shipped meat products to the U.S. The Department said it is still conducting "additional pathogen testing” of all shipments of raw beef and ready-to-eat products from Brazil.
CAHFSA is endeavoring to obtain more information as it relates to the specific plants and products involved and will disseminate same as soon as possible.
We are kindly requesting Member States that are conducting tests of the various products, to share the results with the other Chief Veterinary Officers (CVOs)/Member States who may not be in a position to complete the testing protocols. This is in an effort to assist in the decision-making process regarding the continuance of the measures that would have been taken.
We would also like to advise that Members of the Community to take the necessary measures to protect the well-being of their population, until necessary determinations have been made that the products are safe for consumption. This may entail a comprehensive review of the operations/production systems in Brazil in general and the specific companies in particular. Thus, the requirement of a Regional Risk Analysis.
(Statement from the Caribbean Agricultural Health and Food Safety Agency - CAHFSA)
A Regional Project Team (RPT), established to develop a Regional Energy Efficiency Building Code (REEBC), among other mandates, will be launched in Kingston, Jamaica, next week.
The launch and the first face-to-face Working Meeting with the contracted consultant will be held 30-31 March, at the Jamaica Bureau of Standards. Nine Member States – Antigua and Barbuda, Barbados, The Bahamas, Belize, Guyana, Haiti, Jamaica, Saint Lucia, and Trinidad and Tobago – are represented on the RPT which consists of 19 Members.
The RPT is tasked with developing the REEBC, as well as its associated application documents and Minimum Energy Performance standards for buildings. To do so, the RPT will review the Minimum Energy Performance Standards for buildings as proposed by consultant, Solar Dynamics, in their final report of the consultancy on the Development of Minimum Energy Performance Standard (MEPS) for public and commercial buildings in CARICOM Member States. The team will also review the International Energy Conservation Code (IECC) in an effort to adapt it, where necessary, and present for acceptance and adoption by Member States as a Regional Energy Efficiency Building Code.
This development comes against the background of steps the Caribbean Community (CARICOM) has been taking to implement energy efficiency measures and renewable energy resources into their energy mix. The much-needed economic transformation, energy independence and security and the reduction of environmental effects from the combustion of fossil fuels, are expected to flow from the implementation of these measures.
In general, energy efficiency measures are highly cost-effective as investments and all stakeholders in the Region need to re-examine the way in which energy is used and to identify ways of using energy more efficiently. The energy intensity index in CARICOM is higher than the energy intensity index of the world and about two and a half times that of the European Union. A continued focus on energy efficiency practices can help mitigate the increase in the atmospheric temperatures and climatic changes over the years. The CARICOM Energy Strategy recommends a 33% reduction in energy intensity to be applied in all CARICOM Member States by 2027.
Improving the energy efficiency potential across sectors and economies is crucial for countries to deliver not only on climate objectives but to also improve their energy security, economic development and citizens’ health. Despite the benefits from energy efficiency, the current “low” oil prices pose a risk for the serious investment and application of more energy efficient mechanisms. Nevertheless, reducing the energy demand through improved energy efficiency makes renewable and non-renewable energy more affordable. In a world of finite resources; improvements in energy efficiency must be maximised.
Buildings account for over one-third of the world’s total energy use and associated Greenhouse Gas (GHG) emissions; more than half of the electricity produced is consumed by buildings. Typically, 10% to 20% (depending on building type) of the total life-cycle energy consumed is used for the manufacturing and assembly of building materials, construction, maintenance, refurbishing and demolition; 80% to 90% is used, over the life of the building, for heating, cooling, lighting and ventilation, house appliances, etc.
Recently therefore, there has been an increasing trend to promote supranational collaboration to develop international energy efficiency requirements or standards for buildings, such as, via the International Standards Organisation (ISO), International Energy Conservation Code (IECC), U.S. Green Building Council (USGBC), American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Building Research Establishment Environmental Assessment Method (BREEAM).
In the same manner, the CARICOM Secretariat and the CARICOM Regional Organisation for Standards and Quality (CROSQ) are seeking to develop an REEBC. This initiative is being supported by the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, through the Renewable Energy and Energy Efficiency Technical Assistance (REETA) Programme.
The REEBC is expected to address all of the aspects of energy use in buildings which comprise of, but are not limited to: thermal performance requirements for walls, roofs and windows; day lighting, lamps and luminaire performance; energy performance of chillers and air distribution systems; the electrical wiring system; solar water heating; appliances; renewable energy; zoning of buildings, climate classification and building energy management systems.
(Submitted by CARICOM Secretariat)
All eyes will be focussed on Antigua and Barbuda next week, when the 30th Council of the CARICOM Regional Organisation for Standards and Quality (CROSQ) meets for the close out of the 10th European Development Fund (EDF) Technical Barriers to Trade (TBT) Programme and Directors’ meeting.
The March 13 – 17th Council meeting is expected to attract more than 50 persons from the 15 CARICOM Member States, the Dominican Republic, and even as far away as Germany, as many international organisations and agencies affiliated with trade and the European Union-funded 10th EDF TBT programme arrive in the country for the meeting.
The first day will feature a Close out Seminar of the CARIFORUM 10th EDF-TBT Programme which began in 2012. The programme, which lasted for a period of five (5) years, and will conclude this month, and was centred around the building of the region’s capabilities in the several areas of quality infrastructure, and using these capabilities as a means of managing and reducing technical barriers to trade. Quality infrastructure (QI) refers to the development of standards for products and services; metrology - which is the science of measurements and its related infrastructure; accreditation, and conformity assessment - primarily the services of testing, inspection and certification.
The managers and implementers of the project, namely the German Metrology Institute (PTB), and CROSQ, along with the Dominican Institute for Quality (INDOCAL), will give a breakdown of the project, with discussions centred on the successes, challenges, and lessons learnt over the past five (5) years.
The Antigua and Barbuda Bureau of Standards (ABBS), which is serving as local hosts to the week of activities and meetings, will also use the occasion to launch the Antigua and Barbuda National Quality Awards Programme, which, once fully established, will recognise local producers and manufacturers of goods, as well as service providers who are and have introduced quality management and other quality-based systems and activities into their businesses.
“This is going to be a big occasion for Antigua and Barbuda to host an event of significant regional importance, and also to introduce to the public of our country the concept of creating a quality culture with the launch of this National Quality Awards. These Awards, which will be launched on the evening of March 13 will say to our businesses that we recognise the efforts to produce quality for our own consumption, as well as for export to the region and the rest of the globe.
“It is an initiative that was encouraged under the 10th EDF-TBT Programme, but one we thought important enough to introduce to our public and private sector here in Antigua and Barbuda. It will be a great celebration and achievement for all of us; and to have the rest of the region watching the unfolding of this Awards will be a tremendous boost for the country,” said Director of the ABBS, Mrs. Dianne Lalla-Rodrigues.
It was a sentiment shared by Chairman of CROSQ, Mr. Jose Trejo. He noted that the CROSQ Council of Directors was pleased to be hosted by the ABBS and the country of Antigua and Barbuda for the closing of the 10th EDF-TBT Programme which he noted had brought several notable improvements to the development of quality infrastructure in the region.
“We’ve seen advancements in equipment, physical infrastructure, skills of staff who have been trained in various areas and have participated in exercises to prove their competence over the period. I can say without contradiction that this programme has been a benefit to our region and has enabled us to form closer and greater ties with our colleagues across the region and further north to the Dominican Republic,” he said.
The Chairman said he was looking forward to the week of activities and to discussing with partners from the European Union, the CARIFORUM Directorate, as well as Germany and the Dominican Republic, the accomplishments that have been realised, as well as the valuable lessons learnt, which can be used for future developments in our quality infrastructure in the region;.
The 10th EDF-TBT Programme Close-out Seminar will take place on March 13, 2017 and will be followed by the meeting of the CROSQ Council, from Tuesday March 14, 2017 to Thursday March 16, 2017, where Directors and Executive Directors from National Standards Bodies across the CARICOM Region will look at arrangements for further developing QI across the region as well as other collaborative efforts for the year ahead.
About the 10th EDF-TBT Programme
The Technical Barriers to Trade (TBT) component of the 10th European Development Fund - Caribbean Regional Indicative Programme (EDF-CRIP), "Support to the Caribbean Forum of the ACP States in the implementation of the commitments undertaken under the Economic Partnership Agreement", is funded through a Financial Agreement between the European Union and CARIFORUM.
The overall objective of the 10th EDF Programme is to support the beneficial integration of the CARIFORUM states into the world economy, to support regional cooperation and the development efforts of the Caribbean, in an effort to meet the requirements under the current Economic Partnership Agreement (EPA) between the EU and CARIFORUM. The EPA-TBT component is expected to facilitate intra- and inter-regional trade as well as international competitiveness and sustainable production of goods and services within the CARIFORUM states for the enhancement of social and economic development.
It is implemented by CROSQ and the Dominican Institute for Quality (INDOCAL) in the Dominican Republic, and managed by the German Metrology Institute (PTB).
The hard work of developing Quality Infrastructure in the Caribbean is just starting to pay off.
That’s the view of quality expert, Mr. Pat Paladino, as he addressed a meeting of National Accreditation Focal Points (NAFP) officials from eight CARICOM countries in Barbados this week. The workshop is an initiative under the 10th EDF-TBT Programme, funded by the European Union and implemented by the CARICOM Regional Organisation for Standards & Quality (CROSQ), the German Metrology Institute (PTB) and the Dominican Institute for Quality (INDOCAL). It ends on Friday, February 17.
Mr. Paladino is one of the trainers at the workshop, which is led by Mrs. Claudette Brown – Accreditation consultant and trainer.
Mr. Paladino noted that the global market was moving ahead in areas requiring product tested by labs accredited by an accreditation body that is a signatory to international accreditation agreements. Failure to meet the international requirements could result in a close out for products of the Caribbean, he noted.
“Developed markets set the rules and they’ve embraced the international accreditation system. If the Caribbean can’t meet these rules, our businesses and exporters are not going to be able to do business in these markets. Also, if the region is unable to provide recognized accreditation and conformity assessment services, then businesses and manufacturers will have to look outside the region to be able to have their products tested.
“Typically, businesses would have to go to the US, Canada or Europe and the cost of testing in these countries is probably 10 or 20 times the cost of doing it here, if we had the capabilities. That’s pretty significant for these manufacturers,” he remarked.
The expert, who is a former President of the InterAmerican Accreditation Cooperation, the internationally recognised association of accreditation bodies in the Americas and other organisations interested in conformity assessment, said this was why the work of the CARICOM Regional Organisation for Standards and Quality (CROSQ) and the National Standards Bodies (NSBs) of the region was so important to mitigating some of the international risks.
“All the hard work is finally starting to pay off. There was a slow start getting people on board, knowledgeable and trained, but today we have an accreditation body that is already recognised internationally. We are also seeing a number of labs, both in the medical and testing area, come forward and attain accreditation. So, we are taking small steps, but the question is, are we moving fast enough,” he said.
Governments, he pointed out, must be made to understand why these processes are so important to national and regional development. Standards development organisation must adopt or adapt international standards as national standards to support businesses and export.
Mrs Brown’s indicated that participants would be reviewing the requirements of the ISO/IEC 17025 standard. She pointed out that this standard was applicable to all laboratories and can be used by the NAFPs to assist these labs in the development of their management systems for quality, administrative and technical operations. She pointed out that the workshop would also be covering other supporting information, including the benefits of accreditation, the accreditation process and assessor attributes. The participants were encouraged to participate fully in the activities of the week in order to maximize the benefits.
CROSQ’s Technical Officer – Accreditation, Mr. Stephen Farquharson explained that the role of the NAFP was to assist Conformity Assessment Bodies (CABs) with their quest for international accreditation to meet the needs of businesses. He told the officials from Bahamas, Belize, Dominica, Guyana, Haiti, Montserrat, St. Kitts and Nevis and Suriname that the week-long training would give them the basics needed to provide the necessary assistance to CABs, and especially laboratories.
Consumers need to be knowledgeable about the appliances they are purchasing, and for this among other reasons, the Barbados government underscored the importance of a new energy project launched recently.
Speaking at the CARICOM Member States’ launch of the Renewable Energy and Energy Efficiency Project, more commonly called R3E, Minister of Energy, Senator Darcy Boyce told the audience at the Radisson Aquatica Resort in Bay Street, St. Michael that the project was needed “quite urgently” in the region.
“Why do we need it? We need it to ensure that consumers are knowledgeable and interested in purchasing efficient appliance; that retailers see the benefits of selling such appliances and that consumers and business places eventually recognise savings in their energy bills,” Senator Boyce stated.
He added: “In short, this project is important in order to maintain customer confidence in the industry ... and the installation of energy efficient and renewable energy devices thereby facilitating us to achieve the benefit of the reduction in fossil fuel usage and foreign exchange that we now spend to import those fossil fuels.”
He highlighted that the project would use the development of standards and testing services for adherence to standards to ensure the importation of energy efficient appliances, thereby reducing use of foreign exchange by reducing energy consumption and changing the source of generation of energy use in the region.
The R3E Project, said Chairman of the CARICOM Regional Organisation for Standards & Quality (CROSQ), Mr. Jose Trejo, was envisaged to contribute to the improvement of lives of the average consumer in CARICOM Member States over the long term, by reducing energy bills in businesses, and assisting in making building more energy efficient through improvement in quality services.
How this project differs from others, Mr. Trejo, who is also Director of the Belize Bureau of Standards noted, was in its application of quality services the energy sector.
“The Project is timely given the regional and international focus which is placed on critical energy issues; and its negative effect on climate change and the impact on the region,” he said.
The aim of the project is to develop minimum energy efficient standards as well as a labelling scheme for refrigerators, air conditioners and lighting; to develop standards for solar water heaters and photovoltaic panels; to establish a mechanism to support standards in the testing of the appliances and the calibration of testing equipment and the temperature of the appliances; as well as an information and awareness campaign to bring about a shift in consciousness of consumers related to choice of appliances and behavioural change.
The Project is funded by the German Government, through the German National Metrology Institute, and implemented by CROSQ and the Dominican Institute for Quality in the Dominican Republic.
It is also expected to complement the work CROSQ in undertaking in relation to the development of Regional Energy Efficient Building Codes.
Regional energy expert and head of the CARICOM Energy Unit, Dr. Devon Gardner told the audience of dignitaries, heads of regional and international organisations, as well as the Directorate of CROSQ that the CARICOM Secretariat had placed matters of energy “very high on its agenda”.
He stated that in 2015 energy efficiency was placed as a priority within CARICOM, and in January this year, the Council on Trade and Economic Development (COTED) for Energy, approved the pursuance of a strategy for energy in the region, a crucial part of that being sustainability.
“A critical part of that strategy is that we need to improve the efficiency within which energy is used in buildings; and so a part of that refers to the standards and regulations related to building energy use,” he said, noting that this partnership with CROSQ was hoped to bring about positive results in these areas for the region.
Dr. Alexis Valqui, Head of Technical Cooperation for Latin America and the Caribbean with PTB, stated that despite this being the fifth Regional Quality Infrastructure project Germany had undertaken directly with CROSQ, and partnering with INDOCAL, and it would be a learning experience for all concerned.
“Energy already is or will be visible in the future as one of the key issues and those countries or regions that solve the energy challenges will be also competitive in the future.”
R3E, which focuses on Renewable Energy (RE) and Energy Efficiency (EE) in the Caribbean from a quality standpoint, is primarily based on the premise that the introduction of standards, testing and other quality-related services into the RE and EE subsectors, could result in significant changes to the way energy efficiency is viewed and the focus paid by policy makers, retailers, general public and other vital stakeholders in these areas.
Studies have found that “the use of energy-efficient devices, and the application of technologies for using renewable energies in the Caribbean, are impeded by the lack of important QI tools and services such as standards, testing, inspection, certification and labelling. Consumer protection is insufficient, as is the information on these instruments.”
It is a core issue the R3E Project seeks to address. It is funded to the tune of 1 million Euros by the Government of the Federal Republic of Germany.
This week at the Abu Dhabi Chamber of Commerce & Industry, ASTM International President Mr. James Thomas announced the signing of the organization’s 100th Memorandum of Understanding (MoU). The MoU program supports use of ASTM International standards while also encouraging global participation in the ASTM standards development process.
“This program has been crucial in supporting the global standards community, starting with our first signatory, Colombia, to Gulf nations including the UAE, to Montserrat, our 100th,” said Mr. Thomas. “These signings reflect ASTM’s broad and deep commitment to World Trade Organization principles such as openness, transparency, and the development dimension.”
“We are thrilled that Montserrat is joining this well-known program,” said Mr. Deryck Omar, CEO of the CARICOM Regional Organisation for Standards and Quality (CROSQ) in the Caribbean. “It’s clear that ASTM International standards are recognized worldwide for their high technical quality and market relevance,” said Mr. Omar, an ASTM board member.
During his presentation, Mr. Thomas unveiled ASTM’s new Global Cooperation webpage featuring all 100 countries and regions, including Monserrat as well as Myanmar, which became the 99th MoU partner last week.
MoU partners receive these benefits:
• free participation in ASTM technical committees;
• access to a robust collection of ASTM standards for the national standards body;
• education about ASTM International’s standards development process and technical content;
• minimized duplication of effort in standards development at the national level; and,
• communication, awareness, access to special programs, and more.
These benefits are particularly helpful in addressing challenges such as overcoming barriers to trade.
Mr. Thomas made the announcement during “outreach day” of the week-long activities of the ASTM International Board of Directors in the United Arab Emirates. His speaking engagement – alongside board chairman Dr. Ralph Paroli of the National Research Council of Canada – was supported by the Abu Dhabi Chamber, the Federation of UAE Chambers of Commerce and Industry, and the U.S. Embassy as part of its Discover America Speakers Series.
ASTM International’s overall global engagement has grown alongside the MoU program. Over the past 10 years, membership in ASTM International committees has increased 42% outside the U.S. At the same time, ASTM has opened several additional offices throughout the world.
In 2016, the organization hosted over 100 delegates from nine countries. Over the past decade, ASTM International has also hosted 32 standard experts from 28 nations through its exchange program. Over the next 12 months, the organization plans to host experts from MoU signatories including Bhutan, Ecuador, Saudi Arabia, South Korea, Trinidad and Tobago, and Vietnam.
Also this month, ASTM International’s Global Cooperation Department, which manages the MoU program, received the International Code Council (ICC) Global Award for their dedicated effort in “promoting and providing access to technical standards supporting the building codes around the world, thus creating an opportunity to expand the ICC’s mission to promote global building safety.”
*This is a release from ASTM International
Next week all eyes will be on Barbados as it hosts the ISO Forum for Chief Executive Officers of National Standards Bodies in the Caribbean, which will be facilitated by the ISO Acting Secretary-General, Mr. Kevin McKinley.
The CEO Forum, which will be held at the Courtyard by Marriott, Hastings, Christ Church, opens on Monday, July 4 at 9 a.m. and concludes Wednesday, July 6, 2016. It is being sponsored by the International Organization for Standardization (ISO), and is intended to be a platform for heads of national standards bodies, members of ISO, "to get together to discuss issues related to the day-to-day management of their organisations".
ISO describes the forum, which is expected to attract the Directors of National Standards Bodies (NSBs) from across the region, especially from within CARICOM, as an “ideal setting for fellow executives of NSBs to exchange views on matters of mutual interest, to consider possible solutions to the challenges they face, and to identify concrete actions for implementation in their organisations”.
Barbados and the Barbados National Standards Institution (BNSI), will serve as hosts to the forum entitled "What Keeps a CEO Awake at Night and What Are His/Her Top Priorities to be Successful".
Among areas to be discussed are relations with policymakers; national standardization strategies, funding mechanisms and business models; as well as standards development and publishing; stakeholder engagement – success and failures; marketing and sales of standards, NSB services and operational efficiency.
Director of the BNSI, Mrs. Anthea Ishmael noted that, as a member of ISO, it was a pleasure to host such a major regional event here in Barbados.
"Just like our partners across the CARICOM Region, the BNSI is committed to the development of the quality infrastructure and we recognize the importance of collaborating and working together on areas of mutual interest and also sharing ideas and best practices.
"We are looking forward to very interactive and fruitful discussions next week and to outcomes that would provide the bureaux of standards within CARICOM with an even stronger platform to strengthen the quality infrastructure, thereby making our respective organisations, and by extension our region, more competitive," said Ishmael.
For queries, please contact:
Ms. Latoya Burnham,
Technical Officer, Communication - CARICOM Regional Organisation for Standards & Quality (CROSQ)
Tele: (246) 622-7670 ext 671
A major consultation on the quality of goods and services in Antigua and Barbuda on April 12, 2016, is expected to be the first step toward the establishment of a National Quality Awards for the country.
In a process being led by the Antigua and Barbuda Bureau of Standards (ABBS), and facilitated by the CARICOM Regional Organisation for Standards and Quality (CROSQ), stakeholders from across sectors including tourism, health, agriculture, business, as well as quality infrastructure development, will gather at the Antigua and Barbuda Hospitality Training Institute for a day-long consultation on quality-related matters.
The objective of the consultation is to examine the feasibility of introducing a National Quality Awards to the country that will recognise companies and organisations for their dedication to running quality focussed operations and services, and their commitment to producing high quality products for the country and global markets. It will be addressed and opened by Minister of Trade, Industry, Commerce and Consumer Affairs, Honourable, Mr. E. P. Chet Greene at 9 a.m. The consultation runs until 4 p.m.
It is funded through the European Union’s 10th European Development Fund (EDF) Technical Barriers to Trade (TBT) programme, being implemented in the Caribbean by CROSQ, alongside INDOCAL in the Dominican Republic, and managed by the German Metrology Institute (PTB).
Mrs. Dianne Rodrigues, Director of the ABBS, which is serving as host for this meeting, noted that "the thrust of the Bureau is to offer services that can help promote a culture of quality in the country, and as such this dialogue was a step in that direction".
“We are very interested in what the various sectors have to say about this programme on which we are embarking, and we are hoping that stakeholders can see the value in what we are trying to create and actively get on board and support the process. This initiative will be very beneficial for us all,” said the Director.
"A National Quality Award could help improve the standard and quality of products and services being offered in Antigua and Barbuda, and that is for both the local and foreign markets. It has the potential as well, to be a major branding initiative for the country which is focussing its attention on improving industries and sectors like tourism, agriculture, and health services. One way of getting the kind of growth a country would want is to look at the quality of what is on offer," said Ms. Latoya Burnham, Technical Officer, Communication and Information with CROSQ.
Conformity Assessment Bodies across CARIFORUM States were encouraged on Monday to work together to build a stronger network to improve the quality and ease of regional and international trade.
The advice came from CEO of the CARICOM Regional Organisation for Standards and Quality (CROSQ), Mr. Deryck Omar, as the first ever Caribbean Conformity Assessment Week kicked off in Trinidad and Tobago this morning.
Mr. Omar further emphasized the need for harmonization of standards, processes and procedures, along with mutual recognition of conformity assessment procedures covering goods and services as critical to facilitate trade.
Conformity Assessment Week, from November 2 – 6, is being hosted in Trinidad and Tobago, with support from the 10th European Development Fund Technical Barriers to Trade Programme, which is managed in the Caribbean by CROSQ, the Dominican Republic’s Institute for Quality (INDOCAL) and German Metrology Institute, Physikalisch-Technische Bundesandstalt (PTB). The week’s events are being held in collaboration with the Trinidad and Tobago Bureau of Standards (TTBS), under the theme “Advancing Caribbean Trade Through Quality Assurance”.
CEO of the TTBS, Mr. Theodore Reddock told the more than 40 participants in the workshop that, “the road to regional quality infrastructure”, actually started with the metrology group trying to develop a regional project and along the way attracted assistance from Germany, and North America and eventually broadened to include other aspects of quality infrastructure as well as the Economic Partnership Agreement and the European Union.
“I think we also need to reflect on the significance of what is happening now because in the process of developing regional quality infrastructure, conformity assessment is where the rubber really starts to hit the road. The theory is finished and the esoteric ideas have been discussed and now we getting down to the nitty-gritty – how are we going to be really positively affecting the region as a whole … When we talk about health and safety, the protection of the environment, education, all of these things that are important to us are major conformity assessment activities,” the CEO noted.
CROSQ Council Sponsor for regional quality assurance schemes, Mr. Robert Medford, also CEO of the Grenada Bureau of Standards, stated: “As our market space becomes more challenged, integrating the role of conformity assessment will be a critical factor, and we must ensure that proper systems or processes are in place. Without these conformity assessment systems and processes, realizing the full benefits of the CARICOM Single Market and Economy (CSME) will be difficult.”
PTB’s Head of Technical Cooperation in Latin America and the Caribbean, Dr. Valqui noted the growth in quality infrastructure in the region, as he congratulated the St. Lucia Bureau of Standards which recently claimed the International Organisation for Legal Metrology (OIML) Award for Excellent Achievement in Legal Metrology in Developing Countries. Dr. Valqui underscored the importance of conformity assessment in further advancing quality infrastructure in the region and thanked the European Union for all their development support in this respect.
The key event during this week of activities is the launch and inaugural meeting of the Caribbean Network of Conformity Assessment Bodies (CANCAB) Committee.
The newly formed committee, which falls under the ambit of CROSQ, was established with the responsibility to develop the regional conformity assessment infrastructure as it relates to testing, inspection, certification and market surveillance. This meeting will provide the definition, scope and goals of the CANCAB, along with developing the strategic framework of the regional conformity assessment infrastructure.
Additionally, the week will include an Organisation of American States (OAS) FEMCIDI Programme sponsored regional workshop entitled “Conformity Assessment in National Processes – Building Regional Competence in the Disciplines of Conformity Assessment”. The workshop will bring together both private and public sector, including regulators and business support institutions, to introduce participants to the national, regional and international considerations for the preparation and application of conformity assessment.
The working meetings will end on Friday, with the 3rd Meeting of the Technical Implementation Group for Conformity Assessment under the 10th EDF TBT Programme, which will develop a work plan for the period January 2016 to March 2017.
Caribbean Conformity Assessment Week 2015 represents a major milestone for the development of quality infrastructure within the region, as efforts are made to advance Caribbean trade through quality assurance.
CROSQ’s Technical Officer for Conformity Assessment, Mr. Trumel Redmond, expressed joy at the high turnout of the conformity assessment bodies from both the private and public sector across the region for this important week of activities.
A high level Caribbean Conformity Assessment Week - “Advancing Caribbean Trade through Quality Assurance” - will kick off in Trinidad and Tobago on Monday, November 2, 2015, with representatives from most of the CARIFORUM States in attendance.
The week, being funded by the 10th European Development Fund (EDF) Technical Barriers to Trade (TBT) Programme, which is managed in the Caribbean by the CARICOM Regional Organisation for Standards and Quality (CROSQ), the Dominican Republic’s Institute for Quality (INDOCAL) and the German Metrology Institute (PTB),is also being held in collaboration with the Trinidad and Tobago Bureau of Standards (TTBS). The week, which runs until November 6, will comprise three important meetings for this region under the theme “Advancing Caribbean Trade through Quality Assurance”.
The first event is the inaugural meeting of the CROSQ - Caribbean Network of Conformity Assessment Bodies (CANCAB) Committee.
The newly formed Committee was established with the responsibility to develop the regional conformity assessment (quality assurance) infrastructure as it relates to testing, inspection, certification and market surveillance. This meeting will provide the definition, scope and goals of the CANCAB Committee, along with developing the strategic framework of the regional conformity assessment infrastructure.
Additionally, the week will include an Organization of American States (OAS) FEMCIDI Programme sponsored regional workshop entitled “Conformity Assessment in National Processes – Building Regional Competence in the Disciplines of Conformity Assessment”. The workshop will bring together both private and public sector, including regulators and business support institutions, to introduce participants to the national, regional and international considerations for the preparation and application of conformity assessment.
The week will end on Friday, with the 3rd Meeting of the Technical Implementation Group for Conformity Assessment, which will conduct an assessment of the objectives and results for conformity assessment within the 10th EDF TBT Programme, and then plan activities and objectives for the upcoming year towards the end of the project in 2017.
Caribbean Conformity Assessment Week 2015 represents a major milestone for the development of quality infrastructure within the region, as efforts are made to advance Caribbean trade through quality assurance. The formation of the CANCAB Committee, which comprises representatives from both the private and public sector, represents one of the more important achievements thus far.
The Caribbean is now much more equipped to ensure safety from pesticides in fruits and vegetables with the accreditation of the University of the West Indies’ Jamaica-based Pesticide Research Laboratory (PRL) less than a week ago.
The laboratory was accredited in the area of Food Testing by the Jamaica National Agency for Accreditation (JANAAC), thanks to the Caribbean Aid for Trade and Regional Integration Trust Fund (CARTFund) Project funded by the United Kingdom’s Department for International Development (DFID), and administered by the Caribbean Development Bank. The project was implemented by the CARICOM Regional Organisation for Standards and Quality (CROSQ).
PRL can now provide pesticide residue analysis on fruits and vegetables with this accreditation and be assured that the test results will be internationally acceptable. It is the first laboratory to have received this accreditation, specifically for pesticides, in the region.
Remarks from CROSQ’s CEO Mr. Deryck Omar were delivered by head of the University’s Pesticide Research Laboratory, Professor Tara Dasgupta. In the remarks, Mr. Omar noted that CROSQ and others had extended technical support to the laboratory in securing the certification, which was the second such accreditation performed through the regional organisation’s Caribbean Cooperation for Accreditation (CCA) Scheme. The CROSQ-CCA Scheme provides conformity assessment bodies with regional opportunities to access affordable and reliable available development assistance in pursuit of accreditation.
“Jamaica and the Caribbean at large are well known for its vast array of fresh fruits and vegetable which provide immense nutritional value. More of these fruits and vegetables are being processed along the value chain as the region seeks to increase its capacity in creating value added products,” the CEO stressed.
He further extended thanks to technical consultant Ms. Maxine Campbell for her assistance to the laboratory, as well as the Bureau of Standards Jamaica for its support, and the CDB and DFID for the financial backing. Thanks were also expressed to Professor Dasgupta, Dr. Raymond Reid and the team at PRL for their commitment to seeing the process through to successful completion.
The accreditation ceremony was officiated by Jamaica’s Minister of Industry, Investment and Commerce, Hon. Anthony Hylton, who noted, “A strengthened NQI [National Quality Infrastructure] means that the products and services developed in Jamaica and tests conducted by our laboratories are trusted internationally. It means realizing the full benefits of the National Export Strategy.”